Dual-Stage Oil Cooler
A stainless-steel cooler that cools oil in two successive passes — reaching a lower final temperature than single-stage cooling for more demanding storage needs.
Designed for its job in the edible-oil line, not a generic unit.
Food-contact surfaces in stainless steel where it matters.
Capacity and configuration matched to your material and throughput.
Pairs with our prep/press/filter/refine line; install & spares support.
Technical Specifications
| Function | Two-pass oil cooling |
| Cooling Method | Water-cooled heat exchange, two stages |
| Material of Construction | Stainless steel (oil-contact parts) |
| Control | Operator-managed process controls |
| Mounting | Skid-mounted unit |
| Capacity / Power / Dimensions | Available on request |
Function & Working Principle
Cools the oil in two successive passes for a lower outlet temperature.
Both stages transfer heat from the oil to a cooling-water circuit.
Oil-wetted parts are stainless steel for hygiene and corrosion resistance.
Two stages allow a more gradual, controlled cooling profile.
Cooling operation managed through the unit's controls.
Supplied as a skid-mounted unit.
Working principle
Filtered or refined warm oil enters the first cooling stage.
Oil exchanges heat with cooling water in the first stage.
A second stage continues cooling for a lower final temperature.
The further-cooled oil is sent on for storage or bottling.
Product Photos
Demonstration Video
Watch the Dual-Stage Oil Cooler running — see the machine in operation. More on our Product Videos page.
Applications & Suitable Materials
Used where oil must reach a lower final temperature before storage or bottling.
Quality Assurance
Food-contact surfaces in stainless steel; components selected for the duty.
Machines are test-run before dispatch to confirm they operate correctly.
Checked and packed for export so it arrives in working order.
Documents & Downloads
Full product range & specifications — download
Model, capacity, power, weight & dimensions confirmed per configuration — request the data sheet for your model.
Export Packaging
After-Sales Service
Guidance to get the machine installed and running.
Clear instructions for safe, correct operation.
Spare-parts supply and engineer support when you need it.
Upstream & Downstream Line Equipment
This machine is one step in the oil line. Pair it with the matching equipment we make, upstream and down:
Cleaners, roasters & pre-treatment before pressing.
Oil press machines — screw & bar-cage expellers.
Oil filters and refining equipment to finish the oil.
Frequently Asked Questions
What can the Dual-Stage Oil Cooler process?
It is suited to Edible oil refining plants, Oil filtration lines, Pre-storage deep cooling, Pre-bottling cooling and similar materials. Tell us your seed type and target product and our engineers will confirm suitability.
Is the Dual-Stage Oil Cooler suitable for small and medium oil mills?
Yes. It is built for small and medium operations; configuration is matched to your throughput and workshop space.
Why remove moisture under vacuum instead of high heat?
Under vacuum, water evaporates at a lower temperature, so the oil is dried gently without the heat damage that high-temperature drying would cause.
Can the capacity, power and dimensions be customized?
Capacity, motor power and dimensions are matched to your requirement. Contact us with your throughput, material and country for the full parameter sheet.
What after-sales support do you provide?
Installation guidance, operating instructions and spare-parts support are available. Contact our engineers for details on your project.
Interested in the Dual-Stage Oil Cooler?
Tell us your material, target output and workshop — we send a configured quote and, if you want, a full-line proposal.
Get a Quote →